Got my Keisler estimate
Tremec makes .59 OD gears also. They rock. You can run 4.11s and still be around 2200 on the highway with a 26" tire.
Transmission stuff has gone up a lot, but that price seems pretty out of hand. I'm guessing they are making about a grand above retail on that transmission.
IS that an SFI scattershield at least?
It's pretty dang complete. Here is what it looks like. Not a scattershield but SFI approved.
KEISLER 5-SPEED for 1964-76 Chrysler A-Body
Description Qty Cost Total
73 DART AT 318 4.10
TRM-RC5008A, KEISLER 600HP/600FT-LB 5-SPEED TRANSMISSION ASSEMBLY, INCL: KEISLER CUSTOM BUILT TKO-600 WITH ADJUSTABLE PRO BILLET INTERNAL SHIFTER, SPECIAL 2-BOLT LEVER STUB, 4616 CHROMOLOY GEAR SET, 1PC COUNTER SHAFT, DUAL SPEEDO OUTPUTS, REVERSE & NEUTRAL SWITCH OUTPUTS, 99LB WEIGHT, RATIOS: 2.87, 1.89, 1.28,
1.0, .64 $3,399.00T
DSM-DRIVESHAFT, CUSTOM DRIVESHAFT FOR MOPAR PER CUSTOMER SPECIFICATION, INCLUDES SLIP YOKE, PREMIUM SOLID U-JOINTS, DYNAMIC BALANCE CERTIFICATION, 1200 FTLB RATED THIN WALL STEEL CONSTRUCTION
BMM-00401, BODY SHEETMETAL, TKO, CHRYSLER A-BODY WITH AUTOMATIC OR COLUMN SHIFT MANUAL TRANSMISSION
KE-6774AMNT, CROSSMEMBER, TKO, CHRYSLER A-BODY 1967-76
ISA-622388, TRANSMISSION MOUNT, FORD/CHRYSLER, RUBBER
SELECT SPEEDOMETER CABLE BASED ON YEAR OF VEHICLE
REVERSE LIGHT WIRING HARNESS PER REVISION 0
HD ROLLER PILOT BEARING, MOPAR TO TREMEC
HWM-PACK A, PACK A, TRANS-BELLHOUSING HARDWARE
HWM-PACK B, PACK B, ISOLATOR-CROSSMEMBER HARDWARE
HWM-PACK D, ISOLATOR-TRANSMISSION (TKO500/600/T45RS) or WEDGE ADAPTER TO TRANSMISSION (T45RS) HARDWARE
SPEEDOMETER CONNECTION HARDWARE, INCLUDES CLIP, 2 O-RINGS, BOLT AND LOCK WASHER
HWM-PACK F, PACK F, CLUTCH PIVOT MOUNT-BELLHOUSING HARDWARE
SHIFT LEVER HARDWARE FOR RS, TKO, T-56, AND T45
TMM-ATKO, TEMPLATE, TKO, CHRYSLER A-BODY 1964-76 ( re-order size is 18' x 24' )
MAM-00701, INSTALLATION MANUAL, TKO, CHRYSLER, A-BODY 1964-76, REV.
TRM-A2600-64, KIT TOTAL: 600HP 5-SPEED KIT, INCLUDING NEW CLOSE RATIO TRANSMISSION AND ALL BASIC INSTALLATION COMPONENTS FOR CHRYSLER 1967-76 A-BODY. 60 MONTH PRODUCT WARRANTY. $3,399.00
SMALL BLOCK MOPAR BELLHOUSING FOR KEISLER TREMEC TKO- COMPACT, SFI APPROVED AND WEIGHS ONLY 22 LBS! $549.95
FWM-102-00, BILLET STEEL FLYWHEEL, 130T, 6-BOLT $269.95
#912 CHEVY/MOPAR/FORD FLYWHEEL BOLT, SET OF 6 1 15.95 15.95T
10.75' CLUTCH KIT, 450 FT.LB.RATED, FOR USE WITH 10.5' FLYWHEEL AND BELLHOUSING, 26 SPLINE X 1 1/8' REBOUND CONTROL DISC, NODULAR IRON PRESSURE PLATE, PREMIUM SEALED RELEASE BEARING $229.95
#910 GM/MOPAR PRESSURE PLATE BOLT, SET OF 6 $15.95
1967-76 CHRYSLER A-BODY BRAKE AND CLUTCH PEDAL ASSEMBLY, KING PIN, PEDAL PADS, HARDWARE AND INSTALLATION MANUAL $299.95
COMPLETE HYDRAULIC CLUTCH ACTUATOR PACKAGE FOR 1964-76 A-BODY CHRYSLER WITH TREMEC TKO 5-SPEED, INCL: MASTER CYL, HYDRAULIC RELEASE BEARING, RESERVOIR ASSEMBLY, FLUID LINES, FITTING KIT, INSTRUCTIONS $599.95
SLM-RHA5, CHRYSLER A BODY ROUND HANDLE, NON-CONSOLE 5-SPEED, NO KNOB $99.95
SLA-1630008, CLASSIC WHITE 5-SPEED KNOB, 3/8-16 $29.95
SBM-RHA, CHRYSLER A BODY ALL YEARS, SHIFT BOOT, (REQUIRES PURCHASE OF TRIM RING SBM-TRA) $74.95
SBM-TRA, REPRODUCTION A-BODY SHIFT BOOT TRIM RING $35.95
KEISLER EXCLUSIVE 36 MONTH WARRANTY- BEST ON THE MARKET WITH UP TO 2 YEARS TO ACTIVATE $0.00
SUBTOTAL- *transmission kit quotes valid for 30 days from date quoted* 5,621.45
SHIPPING AND HANDLING 165.00 165.00
$5,786.45
