Stroker engine almost DONE!!!

cam at 251-260
ABDC of 53 put in 2 deg more to 55 or 4 DEG to 57 to get 8.7 DCR with KB calculator, but what ever brian recommends is what Im running on pump gas!!!
10.3 SCR compression
8.6-8.8 DCR depending on Altitude
ported RHS heads from Brian 290CFM at 550
4in Scat Crank
Forged Pistons
360 bored .40 over so 410
Ported Air gap by IMM

Looking to run on 91 octane

Transmission:
904
4200 Dynamic stall
4.10 gears

Frame connectors
Ss Springs
Pinion Snubber

Might be putting in a 6 point cage also

Car will be weighing in at around 3000-3100

Want to know what you guys think..This setup has been beaten to death with Brian and prolly will be buying the kit from him. All thats left is to buy the parts check them out and put them in.