Stroker engine almost DONE!!!

-

SRT_DSTRHOLC

Well-Known Member
Joined
Mar 20, 2008
Messages
6,468
Reaction score
203
Location
USA
cam at 251-260
ABDC of 53 put in 2 deg more to 55 or 4 DEG to 57 to get 8.7 DCR with KB calculator, but what ever brian recommends is what Im running on pump gas!!!
10.3 SCR compression
8.6-8.8 DCR depending on Altitude
ported RHS heads from Brian 290CFM at 550
4in Scat Crank
Forged Pistons
360 bored .40 over so 410
Ported Air gap by IMM

Looking to run on 91 octane

Transmission:
904
4200 Dynamic stall
4.10 gears

Frame connectors
Ss Springs
Pinion Snubber

Might be putting in a 6 point cage also

Car will be weighing in at around 3000-3100

Want to know what you guys think..This setup has been beaten to death with Brian and prolly will be buying the kit from him. All thats left is to buy the parts check them out and put them in.
 
Sounds real nice. Mid to low 11's?

Hoping for 11.0-10.8...

Brian built a setup that ran in CC that ran 10s but his suspension is GREAT and he had a 1.45 60ft I believe, but that motor he said had less cam and no head work. All depends on how I leave and how the car is setup
 
Go with the forged piston! Usually lighter, and a better piston if you opt for some spray.
 
Sounds good! Brian will prolly chime in, I want to map this one out when I put it together.
 
Solid cam? It's capable of running 10.70's in a good chassis for sure.

Regardless of chassis it should MPH in the 124-127 range.
 
The RHS Heads worked real well on my old 410. Brian ported them also. That engine ran real strong. After the Dyno I installed it in the car and drove it down the street, my first thought was this thing is a DOG until I put my foot in it at a Roll in First gear and got into the secondarys banged second hit 3rd and let off, I was like holy crap, this thing moves some pavement. It truly caught me by surprise how explosive it was :D
 
The RHS Heads worked real well on my old 410. Brian ported them also. That engine ran real strong. After the Dyno I installed it in the car and drove it down the street, my first thought was this thing is a DOG until I put my foot in it at a Roll in First gear and got into the secondarys banged second hit 3rd and let off, I was like holy crap, this thing moves some pavement. It truly caught me by surprise how explosive it was :D

that was my exact reaction when i let mine 410 wide open last week it screamed didnt even have enough pavement to reach 4th but boy its scary fast. once dialing it in is finalized itll be a mean duster.
 
MIKE a guy at work does a lot of autocross, he can get me track time, possibly can get strip time too but anyways , hes doing my roll cage for me. nothing too crazy, also with my new gauge cluster ill let know how much he charges prolly real cheap
 
MIKE a guy at work does a lot of autocross, he can get me track time, possibly can get strip time too but anyways , hes doing my roll cage for me. nothing too crazy, also with my new gauge cluster ill let know how much he charges prolly real cheap

yeh let me know, Im gonna need a cage if I go tens lol that means no back seat o well and let me know what the cluster looks like because they sell some with pre cut holes on ebay.. I want one like the rocky mountain dash!
 
yeh let me know, Im gonna need a cage if I go tens lol that means no back seat o well and let me know what the cluster looks like because they sell some with pre cut holes on ebay.. I want one like the rocky mountain dash!


yea i seen a couple on there too i may buy one , but i made a template for him hes gona cut up some aluminum then i was gonna paint it black to match the rest of dash but ill let you know ima give him the template on thurs. ive seen cages with back seats unless your talking about full out roll cage like a 12 pt. you got links to the clusters youve seen?
 
well even if I get 6 point, they would have to slide under lol....take a picture and text me I wanna see it
 
going to get forged
Nice! I also suggest Total Seal Gapless Piston Rings (with a forged piston, the ring should be 1/16, 1/16, 3/16 but of course double check before you order them).
 
Ill see what brian says, I was going to go plasma moly, but will see what he recommends as it is a pump gas car that I will drive a lot more than race.
 
-
Back
Top