Where to put my crank case breather tank
[/I]There should be raised bosses on the underside of the valvecovers. Drill at tap them or use self tapping screws. Cut a piece of sheetmetal to fit and drill the same holes and call it done...
Thanks for picture and I am going to do this today!!!!
I was worried about excessive blow-by but I pulled out the more problematic breather while the engine was running and rev'd it up , oil was shooting right thru the breather hole and I am figuring this is do to the HVHP oil pump. My roller rockers and springs are getting plenty of oil
With the 8qrt pan and 3 quart accummulator -11 quarts this should help keep my engine cool