**Twin Turbo 67 Dart Project**

Got the exhaust all wrapped. It took me another 5 hours to finish it. This was a PITA to get the passenger side header and the rest of it done.
I Drilled the Turbo's and tapped them for boost lines that will go to the Electronic Boost Controller. I also bought a 50" Roll of 7/32 Vacuum line which is the cheapest way to buy it. Cost me $15.00 at ace hardware. Ordered some spark plug Heat Shields that should be here Tuesday.

Still need to buy Spark Plugs, Bypass Hose, 5 Gal of Meth.

I only have a few things left.

1) Pushrods & Set Valve Lash
2) Set Intake manifold
3) Fire up the Megasquirt and save all the values for the sensors etc to the ECU.
4) Buy a 5 Gallon Jug of Non Lubricated Meth from here http://www.worldwideracingfuels.com/ProductInfo.aspx?productid=790072



View attachment phpNs8570PM.jpg

View attachment phpV0A1q6PM.jpg

View attachment phpANyqJQPM.jpg

View attachment phpOQt9BaPM.jpg

View attachment phpN4GeuiPM.jpg

View attachment phpmr5zeyPM.jpg