68 Notch back Barracuda

-
Status
Not open for further replies.
R

RedFish

Well-Known Member
Joined
Sep 5, 2007
Messages
25,850
Reaction score
5,348
Rating - 100%
14   0   0
Contact seller
Hate to have to do it but,
I've decided to sell the remaining meat off of this fish.
My pm box here is forever full so...
Post what your looking for here. If its available you'll get the first chance at it.
 
mopardude318 said:
driver side fender?

interior parts/ door panels?

any pics of the car?
Click to expand...

The left front fender has been tweaked in 4 different places. Nothing that can't be hammered out. Very little rust in that dog leg.
The right front fender has been punched in the nose only but that dog leg will need replaced.
the majority of the guts rotted away long ago.
Well shoot, the digital cameras view didn't show the nose of the right fender. I'll replace that pic later
 

Attachments

  • S6304272.jpg
    104.5 KB · Views: 811
  • S6304273.jpg
    106.7 KB · Views: 810
  • S6304274.jpg
    125.5 KB · Views: 821
Please define rear window channel.
radiator number 38086 for V8-auto. I have a nice OEM shroud for a slant 6 A-body.
To use that should with a V8 engine you would bolt it in upside down.
Common 318 exhaust manifolds
 
do you have the rear glass trim? how much for the barracuda fender emblems? are they in nice shape? thanks--kevin.
 
mopar head said:
The channel the rear glass sits in and surrounding sheetmetal.
Click to expand...

Answering what I can before daylight...
There are 4 or more body panels welded together to create the fence that the rubber gasket sits on. I dont have a clue how one would cut all of that. What sections do you need? Pics ?

I have the stainless reveal moldings for that rear glass. Exellent driver condition or restore to show. 200.00 plus shipping from 29642
 
ok, i really just need the drivers side upper piece! how much for that one? thanks again,kevin.
 
whodacudaman said:
ok, i really just need the drivers side upper piece! how much for that one? thanks again,kevin.
Click to expand...

I can't seperate a complete set. Sorry

The other number stamped in the radiator tank is 2898028

The fender badges dont look too bad ( see pics ).
I didn't notice they aren't the same until I looked at the pics LOL

I got a better pic of the damage on the right fenders nose while I was out there. The buyer(s) of these fenders may also need the badges so I better not sell those seperately just yet.

I can't say Thank you enough for the ad space FABO.
 

Attachments

  • S6304276.jpg
    86.7 KB · Views: 768
  • S6304278.jpg
    38.3 KB · Views: 752
  • S6304277.jpg
    36.3 KB · Views: 756
I sure could use the ash tray and lighter, lighter is in the upper dash I think. Also the windshield washer bottle if it doesn't leak or brittle as heck. Location ?? Oh, possibly the drivers side window regulator for the door.
 
I think that lighter and lighter well in the dash is the same as all others. It's not in the car but I'm sure its here somewhere. I suppose the knob on it might be model specific. Get me a pic of what I'm looking for.
I've got that one year only ash tray too. You need its hanger too or just the tray ?
Window regulator in the drivers door is good.
 
I have access to 4 67's for parts and the ashtray is totally different in size. The 67's have the lighter in it and the 68 has the lighter in the dash by the glove box I think. Both pieces of mine are missing.
 
ta3834bbl said:
woops, forgot to answer your question. :) I need the entire ashtray, not so worried about the lighter. Thanks
Click to expand...

Everything about the 68 dash is different. I pulled tis ashtray and had it bead blasted years ago. I pulled it out of storage back when I was designing the DIN instrument support to fit all models. Everywhere it was touched has a spot of light surface rust now.
The hanger has a wire attached that must have been part of a ash tray light ( not sure ). Maybe another 68 owner could shed some light on that, pardon the pun :)
Priority shipping in the states is 5.20 so lets call it 41.00 total via Paypal.
Pm me for my email address if still interested
 

Attachments

  • S6304282.jpg
    81.5 KB · Views: 723
  • S6304283.jpg
    94.2 KB · Views: 718
RedFish said:
Answering what I can before daylight...
There are 4 or more body panels welded together to create the fence that the rubber gasket sits on. I dont have a clue how one would cut all of that. What sections do you need? Pics ?

I have the stainless reveal moldings for that rear glass. Exellent driver condition or restore to show. 200.00 plus shipping from 29642
Click to expand...
Sawzall, rrrrrrrrrrrrviberationrrrrrrrrrrlotsofitrrrrrrrrrr
I`d want to see pics of the areas before I troubled you.
And what you would need $$$$
 
Redfish:

I'm sending you a message through this post. I'm not trying to highjack it but I PM'd you a message several days ago and I'm thinking your mailbox is full.

I'm definitely interested in the black conv. boot. Is it the correct one for a 67 barracuda? Maybe they are all the same from 67-69? I really don't mind giving the boot some much needed TLC. I just want to make sure that it isn't ripped or torn and doesn't have any holes in it. My zip is 06810 I'm in Danbury CT so I dont know what shipping would be. Let me know what you think if I put the time and effort into it can it be brought back to looking real nice?

Carl
 
I can get a pic or 2 of it. It is the one that came with my 67 cuda vert. I know the car had 2 tops installed before I bought it. This boot may or may not be the original.
I deleted PMs twice yesterday to make somer space.
 
pics of the conv boot. Appears there once was another piece of fabric on the underside that has rotted away.
 

Attachments

  • S6304284.jpg
    122.8 KB · Views: 677
  • S6304285.jpg
    136.7 KB · Views: 664
I would be very interested in the stainless trim for the rear window.I only need the 2 pieces for the bottom but would buy the set if you dont want to break it up.How much for the set?
thanks,Doug
 
dmaccons said:
I would be very interested in the stainless trim for the rear window.I only need the 2 pieces for the bottom but would buy the set if you dont want to break it up.How much for the set?
thanks,Doug
Click to expand...

I already have a deal pending on the full set front and rear. That member may have the pieces you seek available later. Good luck
 
Status
Not open for further replies.
-

Back
Top