Flipping front spring hangers

You must be talking about me. I did this on my Duster after
I put S/S springs on it. I had the stink bug look on the Duster
after installing the springs. I thought about blocks on the axle
but was wondering about suspension problems. Did not what any
wrap-up at the strip. Took a look at the front mounts and
decided to flip them. The only problem is( if you could call it
a problem). Is the off set of the studs for mounting to the
frame. I decided to elongate the holes on the spring brackets.
To mount it I used stainless bolts from the hardware store.
No rust! I flipped them over 2 years ago and haven't had
any problems. It brings the rear back to stock height. Just
take a look.