1 wire Alternator Problem

I know this topic has been on before and I proably didn't pay any attention then but I need some worldly advice now.

Awhile back I had an early alternator converted over to 1 wire. Recently I decided to install the 1 wire on my 64 Dart. Once installed I went ahead and removed the stock hrness connection atthe alternator and wired the alternator in with a heavy gauage wire straight to the battery

Here's where I'm stumped and it's probably a blinding flash of the obvious.

Car won't start however it does crank over. I'm thinking at this point I have overlooked something.

Now that the stock harness is disconnected what about the field wire? Doesn't that send power through the balast resistor to the coil? I am thinking that somehow I'm not getting any fire to the plugs.

I'm missing something so I'm hoping someone here will enlighten me.