Pitman arm is hitting tortion bar! Help?

On my 73-76 K-member setup there is enough room between the pitman and my new 1.14" T-bars to very tight fit a 3/8 drive 1/2" socket. Look closely, there is a shiny chrome socket between the edge of the pitman arm and the bottom of the torsion bar. That distance measures out at 0.726"

With .85" or .87" torsion bars you should have .135" and .145 more room respectively.

So you should have about somewhere around 3/4" to 7/8". Maybe 1/2" between pitman and torsion bar.

73Moparman, can you get a measurement like this?