Pitman arm is hitting tortion bar! Help?

autoxcuda said
On my 73-76 K-member setup there is enough room between the pitman and my new 1.14" T-bars to very tight fit a 3/8 drive 1/2" socket. Look closely, there is a shiny chrome socket between the edge of the pitman arm and the bottom of the torsion bar. That distance measures out at 0.726"

With .85" or .87" torsion bars you should have .135" and .145 more room respectively.

So you should have about somewhere around 3/4" to 7/8". Maybe 1/2" between pitman and torsion bar.

73Moparman, can you get a measurement like this?

Im sorry but i cannot currently get a measurment of any kind..the whole front end of my car is tore apart right now. Working on converting over to manual steering from power for clearance issues for headers. I had to loosen up the motor mounts and jack the motor up just to get the headers and power steering box out of the car..not real happy with that. I am also putting new lower control arm bushings in the car so it might be a little bit before i get it all put back together..