318, max cam size for stock pistons

Thanks every one. That is about what I thought. Here is the specks on the engine.

1971 stock short block

1971 318 heads, with 360 valves, ported polished and gasket matched, Edelbrock Torquer-RPM valve spring kit. Heads shaved just enough to help compression a little, but not enough to cause alignment issues.

Thin .o25 head gaskets.

273 adjustable rockers

Holley street dominator intake.

Carterbrock 650 AVS


904 with full manual reverse valve body (TQ to be determined by cam)

8 3/4 with 3.55 gears

Stock manifolds (for now) gasket matched, heat riser removed

TTI 2.5in duel exhaust system, with cut outs, and flow master mufflers


These are the three cams I was looking at. I thought they would be in the ball park.


http://www.summitracing.com/parts/CCA-CL20-222-3/

http://www.summitracing.com/parts/CCA-CL20-223-3/

http://www.summitracing.com/parts/CCA-CL20-418-3/



Thanks every one!

Like I said this is just a budget build to get my buy until I get the biggy done.