Powershift second and clutch pedal stuck to the floor.

Dang, the z bar can't be in backwards. The lower arm has a crook in it to go around the exhaust pipe. I took the z bar out and put it in backwards and it didn't work. The arm hits the exhaust with little movement. What a pain to do! I am getting good at those flat clips on the end of the linkage. LOL
I greased up all the pivots and the bushings and put it all back together and adjusted the linkage so that the throw out bearing just clears the fingers. It feels normal and the pedal will return up to the stop. The free travel in the pedal is a inch or so....right where it should be. The clutch feels stronger. I did a 30 ft. burnout on the street. It felt good. tmm