Tti headers how!

I know its been asked, I know its been done. But I can't seem to get them in. I have a 72 demon, stock suspension, original V8 car. It seems to be a nightmare, I'm starting to have flashbacks of when I was 18 putting long tubes on the 340 and lifting the.motor and.tranny enough to get them in. I only have limited time to work on the car, I live close to 100 miles away from where I keep the.car and all my parts. It's the first time I have touched in months. Just wanted to know what you all are doing. I got the driver side on ( removing the steering box, the column, and the brake master cylinder. The passenger side I have 2 bolts in it 1 in front and 1 in back ( close to the fire wall. It just seems so close to the frame rail and the torsion bar. There seems to be no room for error. It seems like I mighthave to dimple the header. I was thinking about if I switched over to coilovers I would have more (wiggle room) down there. I just want to know what all you have done. Thanls in advance,


Aj.