From reading your last post you didn't follow what two other members told you to do first. Bolt the k member up with the 4 bolts first and make sure its seated right since the bolts have a tapered shoulder. Don't try to connect the strut rods or torsion bars at the same time (or before) you bolt up the k member. A step by step won't help if you don't follow step 1 first. I'm not trying to be an A-hole, I just want you to realize that you haven't really done what you've been told twice to do. Once you do that everything will start falling into place. It's one of those things that when you do it in the right sequence you'll think to yourself "crap is that all I had to do!!!!" I "been there dun that" with many things and you'll find that the guys on this site can give you great advice.....just read the responses carefully and follow accordingly. Good luck with your build!