MP 292H cam too big?

A, yea, Dynamic seems a bit sky high. Regardless. the actual measuring ratio is 10-1? That is OK for pump gas and a cam that size. Been there done that. BUT, I have done it with the KB-107's (@ 030 overbore) with J heads w/a slight mill for 70 cc and a 040 gasket, it all equals 10-1. I had the Purple 292 cam in there. 93 octane was just fine.

IMO, I'd shy away from domes and iron heads intended for 93 pump gas.

I also had the above build later on with Edelbrock heads. That combo, weight dependent, car set up etc....and it's all in the set up..... can have you anywhere from the high 12's to the real low 12's.

While the stall converter is low, what is the gear ratio, tire size and weight of the car?

Is this going to be a drag car only or mostly?

The reason I ask is that if the car is lightened, has a high gear ratio like 4.10's and a 26 inch tire, the converter will be , well OK, not great, but OK for use.