Brazilian Mopar

Andrev8 said

Helo Guys!

After a period of silence, new stuff arrived!

Two sets of Moog K7103 off set bushing.

And the two LCA rubber bushing, also from Moog.


For now that´s it guys. Iam waiting a new order: pitman, idler and camber / caster bolt kits. It is in the international police, calculating some taxes!

Click to expand...

Good to see you using the offset UCA bushings and the Moog lower bushings. I used the exact same parts in my 68 when I redid the front end 4-5 years ago. I also welded in the LCA reinforcing plates. Everything is rubber except for poly sway bar bushings and end links. I spent a full day fully welding all the seams in my 73-76 K frame and adding some reinforcement around the steering box mount and idler arm area. Also, make sure you reinforce the Lower Control Arm pivot holes. Those are prone to cracking. I also used poly rear spring shackle bushings from Mancini. (7/8" diameter)

Using the offset bushings I'm running 1-3/4 degrees positive caster and the car tracks like a freight train. Very stable w/ 15 x 7 wheels and 215-60x15 tires all around. Pics are of my junk ready to be installed and the "tool" I used to install the UCA bushings.

Keep it up Andre!!