I don't know. Supposedly some of the Magnum's come with a VR Sensor in the Dizzy.
Going to use a Modified "Mad Dart" version of the Lean Burn Distributor to get a Clean Cam Signal!
There will be a second sensor just like this one used for the Crank Trigger.
I ordered a Nascar Reluctor that is Steel and I am going to cut 7 of the 8 teeth off it along with drilling and tapping it for 2 Set Screws so it can be clocked and phased correctly. The New Reluctor will be installed Upside down and the Dizzy Backing plate will come off. Then I will drill the side case of the distributor and install the sensor you see in the pictures. The Sensor will clear the cap with the reluctor upside down and the backing plate removed.
