Looking for a 318, 340 or 360 smallblock

-
Status
Not open for further replies.
hotrod19611

hotrod19611

Active Member
Joined
Aug 22, 2011
Messages
26
Reaction score
1
Location
PA
Rating - 0%
0   0   0
Contact seller
Hey Sports Fans!! I am in the search of a good smallblock motor. 318, 340 or 360. As long as it's complete. Running would be nice but not important. No junk or boat anchors. Got enough of those!! Big thing is I'd like to find one relatively close to me. Around Harrisburg, PA area is preffered. I'll travel to find one if have to as long as it's not halfway across the country. Been finding a bunch of good stuff in the midwest and southwest but no way to get there or get the stuff back here. Any one close to me with one or more of these engines please get back to me. Cash talks and have some to spend!! Even a good running 273 would be kool to play with. Let me know!!
 
I know I'm not in PA (or anywhere close actually), but I do have a complete 1974 360 for sale. Info on the engine is here

I have a shipper that I've used several times, and can crate and deliver the engine to the docks (cheaper than a pick up). Shipping shouldn't be much over $200, especially if you can pick it up from a shipping terminal. Not sure what you're looking to spend total, but I'm pretty negotiable on the price for the engine at this point. Don't need it and could use the space!
 
Appreciate your input. Let me see what turns up closer. If no results than I'll give you a second look. Kool with you?
 
Just check out craigslist I see a ton of stuff in PA lots of $200-300 running 360s.
 
hotrod19611 said:
Appreciate your input. Let me see what turns up closer. If no results than I'll give you a second look. Kool with you?
Click to expand...

Very. Having shipped a couple of engines I know its a lot easier to deal with them if they're local.

Just a shameless plug! :D
 
rumblefish360 said:
LOL @ BluNBlu
Click to expand...
:hello1:

Hey SOMEBODY has to want a nice complete '74 360 core! :D

I'd rather sell it here than deal with putting it on Craigslist and haggling with a dozen people on the phone that won't even show up, even if it means I have to load it up and drive it to the docks on the other side of town!
 
I've got a fresh 340 for sale. I'm in Central NJ and can meet you part way if it works out. Let me know if you would be interested and I can give you more details on the build. The intake and carb in the picture have been sold so won't be part of the deal.

Ken
Edison, NJ
 

Attachments

  • image0003.jpg
    75.5 KB · Views: 234
Hey Physixx,,,,,Hmmm,,,,Now there's a very tempting deal. A 340 would be perfect for my 66 Cuda project. I know the Edison, NJ area as well. Been to the Expo Center quite a few times. Would kind of money are we talking here? Be nice,,,,I got 3 ex-wives and 14 children to feed!!! Kidding!! I have LD340 intake and a practically new Carter AVS that would top that off right nice. Let me know. Thanks
 
Best bang for the buck. a 360 Magnum. Pretty good heads, hydraulic roller camshaft, most cubes.
 
..any one.. fresh built 340 ..$3800.00
67 340 also available ..$ 1700.00 needs to be put back together with new parts all inc .. PM me .
 

Attachments

  • long block340.jpg
    90.4 KB · Views: 193
I have a magnum 360 motor ran when pulled out of a 95 ram 2500. It is complete throttle body to oil pan. I tore it down for storage about 2 years ago and haven't touched it since. I'm in central pennsylvania.
 
Hello Cuda Guy,
Heres a thought, I have a 1967 273 Super Commando Motor out of a Barracuda that was rebuilt before i got it in my 1972 Duster. The motor runs good with one little problem, it has blow by. I havent done anything to try and figure out why but i do know that I am getting ready to get a fresh built 340 motor right after christmas, so I will be removing the motor soon. I will most likey remove some of the parts for that motor like valve covers, intake, and starter and alternator, but I would willing to work with you also, I am not sure what it is worth but call me and we can talk more, I live in Howell Michigan not to far from you, i can send vidoe of motor running and any picture you want.
 

Attachments

  • IMG_0105.jpg
    93.7 KB · Views: 144
  • DSC01492-1.jpg
    119.2 KB · Views: 170
Well Folks,,,I found my motor. I appreciate all the offers I've been given on here. Wish I had the funds to buy all the motors that were offered. You guys have some great deals. But fortunately I found an engine that's real close to me. It's a 340 block that's virgin bore and in good shape. 70 model year. So I've made my choice. Came with a lot of parts like aluminum intakes, extra carbs, brand new purple shaft 509 cam and lifters, springs, and also new Carter electric fuel pump. Even got a set of Formula S black crinkle valve covers. Once again I thank all who answered. Now I am on the search for a decent set of fenderwell headers for my 66 Barracuda. I'll be posting a new thread for that search. Today is my 50th birthday so it's time to sit back and relax and watch the final NASCAR race. Go Carl Edwards!! See ya!!!!!
 
Hope all works out for you, good luck with the 340 Build, I too am looking forward to installing my 340 come Christmas time here in Michigan, if any one is looking for a good 273 commando please let me know and we can work out a good deal.

Thanks
 
Ive got a 96 ram new tranny and a 318 needs tuned amd needs out of my driceway.. Lancaster pa

Feel free to make an offer
 
Status
Not open for further replies.
-

Back
Top