What Products are Needed in the A-body world?

I may be wrong but I think he's leaning more to the parts nessesary to make it big bolt pattern and fit some big tires under the back and make it stop good,one poster had mentioned the bushings for the upper ball joint so you dont have to look for the proper ones.....so in that thought I would like to see a ball joint...not a bushing....build us a ball joint for the disk brake swap!!!! then a driveshaft safety loop that bolts on to the factory crossmember bolts. then a pinion snubber that is adjusted with a screw action rather than a pin....... weld on lower control arm trusses....weld on lower control arm mounts for sway bars....steering couplers to switch from power to manual steering.....coil over kits that work with the stock k member.....shock plates and u bolts for an 8 3/4 swap....at an affordable price.....

fanofpetty said

Well, reproducing parts is fine, but be perpared to deal with licence issues, from chrysler, as there known for going after the little guy using there name, etc. A friend of mine got shut down just for making and marketing mopar videos, and chrysler's lawyers were not happy about it!

Click to expand...