5.7L hemi Duster/resto.

any one done one of these before? I got most of it figured out just not 100% sure on this its pin #12 out of the PCM C1 Black/Black connector. my schematic reads "Fused Ignition Switch Output (off-run-start)" my thoughts are that it would be fused constant power to the PCM if it was the pin #11 "Fused Ignition Switch Output run-start" that i would say that it is not constant power but only powered in the run and start positions.


just not sure on the #12 pin the only thing i find on my schematics are showing it going from C1 pin#12 to the totaly intreg. power control modual that i do not have and dont plan to use. it seams to be just a relay/fuse box to me