abodybill said

Dave,
I had the same problem as you.

That threaded rod left burn marks in my hand but it didn't take long for me to drop it.

Anyway I emailed American Muscle direct and told them of my problem with there tools and she told me that this was new to her anyway she set me all the bad parts I needed to make it all like new.

I have done 2 other cars with the new rods/parts and have not had any more trouble with there tools.

I know they stood behind my problems with there tools and all this was about this time last year.

Hope this helps you out.

Thanks,

Click to expand...

nicoles said

I know you have already got the bushings out but when I did mine on the 66 cuda I used a port-a-power and some blocking that i made up on the weilding table. and they still were a pain in the tail pipe to get out. If you plan to do a lot of powder coating you should look into the kit from Eastwood's It was $130 or mybe $150 but I know I saved about 2 grand in the last couple of years. They wanted $150 to do the intake and that was after I cleaned it! Cole's Dad

Click to expand...