just rebuilt runs bad

and just to add... it will run, but not good, or barely if; incorrect firing order,reversed rotation on your cap or wires switched, the 5 ohm side and the 1.2 ohm side on ballast are reversed, stuck float in your carb, vacuum leak, poor fuel pressure, less than 12 v to the distributor .a bad ground to any ignition component, a tooth off on your timing chain,a flat cam lobe,stuck or bent valve or pushrod.there is really nothing left.chime in if im missing something here.im just trying to help.plug off your advance pod when starting it up and getting it to run. make sure all your vacuum leaks are plugged off . i cant express enough how correct these guys are when they say to set up your ignition with a factory system get it running good and then start adding your upgrades.i think electronic is the best choice because its plug and play without all the points and bs ,but thats just me