Whats the biggest street cam I can use?

Cudafever said
Were not trying to bring you down, but trying to help.

Set that motor a side, start looking in the adds, Find a rolling chassie Mopar and then build that eng to fit it!!!!!

In the idle to 6000 rpm range a well built 360/410 with ported edys/rhs heads WILL MAKE MORE HP!!

From 6000 to 8000+ Your combo will SMOKE IT IN POWER AND TORQ! hands down.

The better the head the more power it can make BUT ONLY AT HIGHER RPM.

Start looking for a roling chassie, you will be glad you did.

AbodyJohn88 said
would u be interested in trading? i will give you the stock stroke x headed 360 out of my barracuda that will drive to the racetrack run 12.80s all day in the heat than drive you back home while being stuck in traffic and never getting above 180 degrees. it seems to me that you would be better off with that type of setup. you can still run street gears and a tight converter and it makes power from 1500-6000k. if you got a screaming deal i mean i will trade you my motor plus cash. let someone who wants to run in the low 9s high 8s with that bad *** **** you got get there hands on it. forsure with the right cam and a comp bump it would put my pretty little notch in the low 9s. but please dont desecrate a r block w9 headed combo by runnin it with a 3000 stall verta and 3.55s just FOR THE WOW FACTOR?

LOL funny.. u want this motor and u will be paying me over $15K for it.. I'm not an idiot.. I know what I have and I'm not trading it for a 360 with X heads.. wow! :ncool:

As far as running it in a different car .. I don't plan onit either.. if it sux then I will reevaluate it. Maybe do turbos or S/C.. I don't have 3.55 or a 3000 stall either.. carry on guys, go look for the next victim.