Stock 360 from a 1984 Dodge Pickup

Ok
Here is the motor just after being pulled.
It was suggested in another post by members that if I don't have the funds to tear the whole motor down now, I should just run it as it is.
So the plan is to degrease and scrub it, do the oil pick-up and passenger oil pan, remove all smog components, plug the EGR ports on the heads and run it with a new small Holley or Eddy carb on the stock iron intake.
Everyone in the world says to ditch the 1984 era smogger ThermoQuad.
As you can see in the pics taken just after it was pulled from the truck there is a bout 50 miles of smog and air rubber tube on that motor.
The question is how do you run a stock 1984 360 with a stock intake with a non smog Holley or Eddy carb, and remove all the smog stuff?