Legendary Door panel tool

I agree with Ksipes1. My original panels were built way better than the Legendary panels. The board that the factory used was more of a stronger masonite type board that had the slots cut into them and the alligator clips slipped in and held nicely. These Legendary panels are thin and if you try to separate the panel, you may or maynot have good luck in doing so without damaging the panel. PLUS....I would hate to have to pull these panels back off for any reason, because I can tell you this. The clips will pull right through the backing board with the slightest tug on the panel, with or without a panel removal tool. If you attempt to get the clips in all the way behind the panel between the vinyl and the board then like he says, you can see the clip bulging through the vinyl and it looks like crap. I kept my old panels just in case I ever had one of these fail.

Lots of money for a cheesy backing board, in my opinion!