My first panels were thin. I called dantes. he had them send me the newer panels. You won't get them until they are out of the old ones. And if you buy dirrectly from ledgendary good luck. They will not help you unless you buy a large quantity every year. Always use a popular third party. I use Dantes for everything from everywhere.
Now the easy way to use the panels you have. Go to a salvage yard and get some panel clips from a 85 to 89 mopar. Take these clips and cut three of them to different lenghths with a dremel or fine cut off wheel. The part that slides behind the panel. Then sharpen them again with the dremmel front and sides inner and outer, Take the shortest one and put it in the hole and while pressing the face of the outside of the clip against the panel slide the sharpened end into the panel as deep as it goes and turn it alittle. This is now your depth guide. Once you have the first one bottomed go onto the second then third. These same unaltered clips can be used for installation of the panel They are thinner and not as easy to be seen from the exterior side. They are green in color, If you have the larger holes in your doors ues the black corner clips from the 70's after you use the green for fittment. do not use the wire clips. Throw them away . they will eventually be seen. just what works for me and it was fast and easy once you get a system going. Steve
