6.1 fuel system help

Firstly, that car is freakin gorgeous. Secondly, I have a rather unique setup as I used an Indy intake and my own custom made fuel rails, but here's what I've got on my 5.7:

Hot Rod City Garage aluminum fuel tank with in-tank pump (used to be a Walbro 255, they swapped to a different brand, but it's an equivalent pump as far as ratings are concerned)
-10 AN feed line from the tank to a Y block
Y block splits the -10 line into two -6 AN lines (one into the back of each rail)
From the front of the rail out of -6 lines to my regulator (Aeromotive 13301, got it in a package with other parts)
Return line on the regulator goes into the stock hard line back to the tank
-6 soft line from the factory hard line back into the tank

All the line and fittings are Summit Twist-Tite soft lines. Super easy to plumb and put together and leak free on the first try, lol. They are NHRA rated and are similar to nylon braided lines, though they don't have the external braid (they look like regular rubber hoses, but they are rated to 250 psi). I don't have any pictures right now, but I'll try to get some tomorrow.

I think you can buy the connectors somewhere that will hook up to the stock style quick disconnect fitting on the intake manifold, but I'm not sure exactly where. I've heard other people mention them and I'm sure they're out there, but I didn't have to worry about it, I had other problems trying to get my rails to fit, lol.