Some pictures of how my car was done. The snout bar is welded to the top of the frame near the k-member and to the cage on my car. Nothing stopping anybody from just welding a plate to the firewall and anchoring it there, to the top of the shock mount similar to mine and then thru the inner fender onto the top of the frame rail like mine was done. Some of the pictures are not that clear as everything is black...if you need better pictures let me know & I will go out and put some masking tape on the tube so you can see it better....And there is no real cutting of the inner fnders, just 1 hole per side to get the tube into the engine bay....