Here is the second part of my project. I started the day just wanting the loosten a few bolts and re-align the front fenders, the drivers side needed to come up at the rear and front needed to shift a bit to the left. That was the plan, what ended up happening was I pulled both all the trim, then I loosened the bolts, then I thought to myself, "these are going to be much easier to sand off the car," so I proceeded to start yanking it all off. I plan to pull the passenger door next so i can replace the hinges. I did the drivers door a few weeks ago, and it was a lot easier doing all the sanding off the car.