rate this stuff for add some horses on a 318

thanks for your comments
@rumblefish360 - the heads are prep´d to match the ede-performer-intake .. in my former thread
http://www.forabodiesonly.com/mopar/showthread.php?t=120510
can been seen how i started....
...unfort. i have no pics how i ended... i spended some more hours (40 or 50 i guess) to finish them


-a big thank you to my swedish friend Gustav, for giving me the right hints to do a proper job. He also was the man when it comes to create and design headers for the fish, and in fact he spended about 7 hours calculating flow etc for each side and getting them into the enginebay was really a pain in the arse.. (yes there was a point, he stated, that he must be sick, when he told me, that he would fabricate me some headers, and he would feel better, if we have never met each other...)
it took about 6 hours each side to weld the headers and get them on the engine
they are specially designed with extra long tubes to balance the smaller stock valves

the goal was to build a "funmaking teeny screamer" on the lowest possible budget


@64physhy ... hmm... maybe worth a try next spring ... if i could find a 600cfm Holley (may resting un-used in a garage of one of my friends) i will do a swap and test.

@pistha - 20 bucks for the valve job, that´s pretty cheap, the engine-shop i asked will take 35 for each valve !
conc. the fuel - now i use: Shell V-Power Racing or Aral ultimate both shoud have over 100octan or octanbooster on superplus standard fuel.

@rat patrol - i often thought about a stepper gear, but at this time no money for a swap, as i had to finish my wife valiant, which rest´s now nearly 11 monts in front of the garage, due to a brocken engine