Electrical is gone

Nothing except dig into the wiring diagrams we posted and start checking.

On signals, start with brake lights, do you have them? If so, it means the power from the brake light switch is going THROUGH the turn sig. switch OK, and both signal bulbs are OK

If the above is true, find the flasher, and make sure it has power. If so, try another flasher or just jumper around it, which obviously will give you a "steady" light when you move the lever

Gauge lights: Turn them on, turn the dimmer all the way to the left (bright) and then go to the fuse block and see if you have power on both sides of the instrument light fuse.

If so, move up to the instrument cluster and check there.