Performance and Race Parts

FOR SALE:

Hooker #5204 A & F body Small Block headers 1-3/4" tube, coated(early type, not Jet-Hot) $200.

Polished Edelbrock Performer intake manifold, 318-360, from street-rod. $125.

Pair Cragar Super Tricks - rears - 15" x 13", 6-1/2" back space, 4-1/2"-4-3/4" bolt circle. Drilled for screws. $250

Milodon #30940 center sump deep pan for small block 360 with pick-up. 8qts + filter. $125

NEW Speed-Pro R9278+.035". File fit, plasma moly ring set. 4.350" bore. 1/16 x 1/16 x 3/16 with low tension oil rings. $90. (summit @ $123)

New Moroso solid motor mounts for B,C & E bodies for all V8s except hemis. Part #62520. $25

MSD 7AL-2 Gold Ignition box, utilizes chips for rev limiter. Carried as spare for years. Just bench tested-works good. Going to hemi controller- don't need anymore. $250

MSD 8251 HVC coil for 7 series ignitions. $75

MSD 8739 2-step module. Fits above box and others. $40. Buy 7AL-2 and coil & will throw in the 2-step.

New Sealed-Power BB Mopar High-Volume oil pump #224-4146V. Still in the box. $50

Edelbrock SP2P Intake manifold for 318 small block. $80

Take-off 3.9 liter V-6 stock valve covers from 1991 - only 10K miles. $5

New Mopar Performance P4120459 1/2" head bolt washer kit. $10

2.74 first gear/low gear set for 904/999 torque-flite transmissions. Get off the line quicker. $100

New Rhoads lifters for Mopar V-8 #20118. $75

New 8-3/4" or Dana 60 Axle retaining plates(pr) $5

New Elgin 383-400 moly pushrods for adjustable hydraulic lifters. Cup & Ball ends. 8.300" overall length. $75

Manton RB BB Mopar Pushrods 3/8" heavy wall. Cup & Ball ends for adjustable rockers. Set of 16. 8.710" 'Effective' length or 8.780" overall length. Low runs-like new. $100

New TCI 5.0 ratio Band Apply Lever for 727 & 904 Torque-flite transmissions. $20

RJS Mesh diagonal window net, Used 4 times. SFI expired. $15

S.B. Mopar 273 factory connecting rods. Used in other small blocks for liter weight rods. $80

NEW Manton series 4 heavy wall 8.900" x 3/8" pushrods. Ball/ball ends, hardened tube. Never used. Set of 17. $150 OBO $225 New.

1967 440 Engine block D440 Dated 4-7-67 if someone needs a correct date coded block for a restoration. $500. Heads and intake also available.

Brand NEW 1996 Dodge Dakota truck frame. **BARE** For 2 wheel drive short box. Cut off at rear axle...have rear section(approx 3ft). You Haul! Want rack and pinion & A-arms on a street rod? $50

SB Mopar Adjustable Pushrods for hydraulic lifter and stock type rocker - Ball ends. 15 good...1 Bad. $50

1967 GTX & B-body 26" radiator with original fan shroud. Nice! Been out of car since 1972. #2785936, tested. $599

1990's 318 Throttle Body Injector with 2 extra sets of injectors - some New Holley injectors plus extra gaskets, sensors etc. $50

Family Software 'EGT' Kit - Exhaust Gas Temps with single exhaust probe and digital readout module. $100

TRW Forged 340+.030" (4.070" bore) 12.5 compression domed pistons. Litened and gas ported. 1/16" rings. Takes .990" BBC wrist pins (not included). SBM is .984" pins. BBC pins have more available wall thickness & lengths. (Almost $500 in litening, gas porting and boring wrist pin holes. $150 or make an offer/trade.

NEW Flowtech Headers for Big Block Dodge trucks. 67-82 383-440 1/2 & 3/4 ton pickup or 74-78 Ramcharger. #13504 , 1-3/4" tubes. In the box.
$150

Used Mopar Performance mini starter. Worked great when removed. $80


PM for more pix or info. Thanks.