Tubular Lower Control Arm Thread

Mad Dart said
Just an Idea,, can you make the bend on the 90* Tube follow the same angle as the Main Tube and then Dog leg it into almost the same area that you have it at now? That tube would have 2 different bends in it so I don't know if it is possible. Seems it would miss the Strut Rod that way and you would have room for the sway bar provision also.... Hard to tell in the pictures though.

Does the sway bar go above the LCA or Below it? Trying to picture it in my mind.

I have tried that also Louis, but a 90 will be best to clear everything and still be mounted out far enough to give the arm support and also tie it into the gusset. Another issue is clearing the brake caliper.

The sway bar goes below the arm.

Here is another attempt and I think it will work. As long as I have clearance with the frame rail. I guess I will have to mock one side up on my car to make sure, but looks like it should work.