Urgent!!! F,M,J spindle hoses

Ok, so last night I was finally able to end the brake hose debacle.
And this is how I did it:
In order to mount the F spindels on my 68 valiant with front sway bar I had to swap spindels right to left, so the calipers are in the rear.
And to be sure I don't have issue's with dangerous bends in the hoses I installed the calipers upside down, so left one on the right side, and other way around.
I used the 73-up a-body hoses I initially started with. The rockauto part number for those hoses is: WAGNER BH79382.
The hoses were also installed upside down, so the hard line goes down towards the caliper.
In order to bleed then properly I had to balance them om the LCA with the bleeder on top.

Check out the pics!

Antoon