I'm a friggin' stupid, idiot, moron...

Back in 1979 I had a 426 Hemi in a 1966 Belvedere II 4 door that I would street race.I was in bed one night and woke up from a dead sleep about 4:00am because I realized it was dipping into the twenties that night and I had forgotton to drain the water out of my motor.I went out in my shoes and underwear and a jacket and slid under the car to open the petcocks I had installed on both sides of the block.Fortunately the temps in the garage were still in the high 30's and all of the water drained out on the floor. Sure was puckered up till i saw that water coming out. I just read a good article in some publication about pinning and welding cast iron so it can be fixed. I had a 273 once in a race car that we had ported all the way into the water jackets.Since we had nothing to lose we put Devcon over all the spots we had gone through and I used those heads for another 5 or 6 years with no leaks.Good luck. As far as the peckerhead club goes I have probably been their posterchild for 20 years or more.