Napa sells a bushing undersize outside diameter for this application. They have two listed one for standard to standard crank and one from standard to Auto crank. Our local NAPA guy got me some. You can also turn it down on a bushing holder in a lathe. If you get a measurement off your crank I can turn some for you in different sizes for cost of the bushings and shipping. No labor charge . I have a lathe and mill and always looking for a reason to play on them. I wil help ya. you get the measurement or Send me something that fits snug and I will turn you some .001 over for press fit. and a couple more .002 .003. Easier then pulling the crank if your NAPA guy can't help
