NEW MEMBERS ((( My CUDA at the track VIDEOS )))

I posted a link a while back and thought I would link to it again from Scotty's site. This is my 1st time at the track with the Indy heads and intake on the stoker. Basically the entire top end was new from cam to carb. I couldn't get the thing to launch, the motor just layed down for a split second then I layed rubber till the 1/8th mile. Look real close at the rear tires down the track and you'll see 2 black marks following me through 3rd gear. My 60ft's were terrible but once I got the sled moving it got some legs. I bent all 10 wheel studs and the axle perches that day. I'm lucky to still be here. :shock: :shock: :shock:

Once I get this thing tuned it'll fly!

I have no line lock so I'm working 3 pedals with 2 feet. I know I need a better burn out but the tires did grab enough at first to lift the wheels. Look at sig below.

click the link and there are 2 videos

I ran 11.11 at 127.04 MPH with 1.74 60 ft

http://www.mopartech.net/phpBB2/viewtopic.php?t=777