Parting a 68 Dart sedan

-
Status
Not open for further replies.
Kind of a dumb request on my part ( :D ) but I need the plastic body plug that goes in the hole in the firewall that is about 4 inches to the left of the master cylinder. It's and odd-ball size and doesn't come with the body plug kits.

Let me know what you need to get it to me here in Connecticut, or if you need something equally small/dumb, maybe we could do a trade? LOL

Thanks,
George
 
I need a crack free right tail light lens and a perfect chrome left tail light bezel. Some nice black kick panels. Rust free front fender to door splash shields. Thanks
 
Kind of a dumb request on my part ( :D ) but I need the plastic body plug that goes in the hole in the firewall that is about 4 inches to the left of the master cylinder. It's and odd-ball size and doesn't come with the body plug kits.

Let me know what you need to get it to me here in Connecticut, or if you need something equally small/dumb, maybe we could do a trade? LOL

Thanks,
George

I'll look, I have several parts cars so I should have one.
 
I need a crack free right tail light lens and a perfect chrome left tail light bezel. Some nice black kick panels. Rust free front fender to door splash shields. Thanks

The lense I'll look at, the tail light bezel your going to have to buy new, everyone I've ever had has been pitted. The interior is tan/brown, I'll check the splash shields when I pull the fenders.
 
Two or four door? If two door I am interested in the window frame and all the related hardware.
 
I am putting glass doors on my car and I need the whole post style window frame removed from both doors with the mounting hardware and the vent window assemblies. I have clean steel doors now but hate to butcher them up. In NW Indiana so shipping complete doors is cost prohibitive.
 
Hey Roy.... Happy New Year! Hope alls well.
I think I asked you a while back- do you have a good (non leaking) power steering gear box by any chance? If you do- hold on to it for me. Thanks
 
Got this? Forward upper corner of the driprail moulding. Looking for the pair.
DSCN1488.jpg
 
Hi Roy,
I have a 68 Dart 270 that needs a drivers side fender mount turn signal. That is the only thing on this car that does not work. Let me know. Joe in Deltona. Might have to come down by you and get some strawberrys.
 
Roy,

I forgot, but a correct gas cap would be nice to. The 68 was unique for that year or else the handle will not aligne correctly. Don't forget the drivers side turn signal. Thanks, Joe
 
Right side tail light assy without bezel and lens
Side markers... Condition and prices please
 
Status
Not open for further replies.
-
Back
Top