Rear Axle Length

I have been avoiding this thread but can't help but telling you what you have. This was a rear that was cut for a center shaft chassis car. I have seen some of these before. The rears originally have equal length axles and the pinion was offset to the left or drivers side. The hump in all mopars is off to the left as is all motors from the factory. When building a Chassis car The motors are usually centered. The rear you have is a B- body with 2 inches cut out of the Right. To correct this rear you need to cut 2 inches out of the left. Then you can put equal lengths back in and install it with the proper back space wheels. This is just what happened to alot of Danas. I have Factory A and B Danas They all have equal length Axles. A's are 53 B's are 55 flange to flange