**Coil Over Conversion with Stock K**

Got the new LCA's and mounted them up. There is way more clearance between the Adjustable Strut Rods and the gussets/tube area.

I measured my ride height off a picture of my old car. In the front the side tread is just under the lip of the fender. I really don't know what size shock to order until I figure out how I am going to mount the upper shock mount. The top shock mount will eat into the 12" you see most likely about 1" and I will set the lower shock mount to make it around 1" also. So with that in mind the shock in the mid travel should be about 10" add around 4" or so for travel and I need a shock around 12" Extended and 8" Compressed.......

Something like this I guess....

http://www.summitracing.com/parts/HAL-DS301/

There is minor clearencing that I will need to do which is no big deal.


View attachment phpGm2eWmPM.jpg

View attachment php0KUBCiPM.jpg

View attachment phpgFWtX6PM.jpg

View attachment php3tPn3SPM.jpg

Here is where I scratched on the inside fender well where the snout bar needs to kinda be.

View attachment phpDA0HGMPM.jpg

View attachment phpbIqiFzPM.jpg