Front sub frame reinforcement
Henry1962s, your bars look great, now what if you keep going forward like a "J" bar staying close like you have it to the inner fender and weld to the side of the frame rail right before the bumper mounts? You would still have tire clearance.
Marty,
was following this thread closely as when lifting my s on rotisorary I noticed the flex where you have indicated. Belive it or not it severly reduced once chassis connectors were installed but still apparent. Check out my take on the XV ones. I dont like how the XV ones protrude into the wheel section, I think this style would still offer the support you are after. It picks up the double skin section on firewall and you would run a good bead along the top of the shock tower. Just need to see what the engineer says about them..
Henry1962s, your bars look great, now what if you keep going forward like a "J" bar staying close like you have it to the inner fender and weld to the side of the frame rail right before the bumper mounts? You would still have tire clearance.
