Yep kinda what i am thinking too. I have used a press before on many other studs over the years, but it should go without to much tonage.
I will try the press and if it is much to stiff I will back off, i do not want to crack a hub.
Other thought would be to drill the hub a few .000s large for each stud, but that is a last resort and needs to be done evenly. if I have to go to that level i will have my machine shop guy do it because the rotor and hub face need to be true as do the stud holes so that there is no offset.
thanks.. Anyone else have this issue on these rotor hubs?