vibration

Hey guys, as far as my problem goes it aint the driveshaft. I tinkered around on the engine a bit over the last couple of nights. I pulled all the plugs and had to regap about 4 of them and about 4 of the plugs were just snug, didnt take any effort to loosen them up. Then I pulled the cap and rotor on the dizzy and all the contacts were seriously crudded up. Took a piece of sand paper and cleaned them all up. My trip home this morning netted better results, took the old beast out and ran it up to 75 for a bit. It is running alot smoother but it still has a bunch of carbon build up that needs to be cleared out. The truck wants to diesel a little when ya shut it down. Thankfully I didn't have a drive shaft issue, I'm going to go get a new cap and rotor for it and figure out what I'm gonna do about clearing out the carbon. I did the water down the carb thing to try and steam clean the chambers but I'm not sure if it removed any thing. Seemed to help though. :burnout: