Why does my car feel sluggish?

Okay gentleman lets just take a deep breath. Before going any further with this thread as far as what is or what isn't the problem Magnum needs to answer the 1st and most important question. Magnum if you don't have a timing light or know how to use it find someone who does. First disconnect the vacuum line at the distributor, if it has one, and plug the line. Next idle the engine down to 700-800 rpm to make sure the centrifugal advance is not operating. Next read the timing with the light, this is your initial timing (do not adjust anything). Next start to speed up the engine and record at what rpm the timing starts to advance and at what rpm it stops advancing, you may have to go above 4000 rpm. Lastly what is the timing when the ignition stops advancing, this is your maximum centrifugal advance and again what was the RPM at this maximum.

Like I said until we start with this info any further discussion is just a waste of time.