hughes or comp camshaft

Hi Antoon,

after comparing a lot of engine combinations i ended up with the comp cams xr286hr hydraulic roller cam (my block is oem roller block). Specs are 236/242° @ .050" / .544" Lift. For future upgrade i wanna use 1.6 Rockers, heads are good to .600" Lift. Engine is not in the car, i expect it to pull to 5000 rpm with viery good street manners. I can tell you in about 8 weeks....:D

Never thought about the solid lifter cams like you, before i found the roller cam block i thought about the xe295hl cam. Check out this build, then you will have an idea about the powerband:

http://www.carcraft.com/techarticles/ccrp_1006_small_block_mopar_stroker_dyno_test/index.html

Michael