My version of a inner fender support/front subframe stiffener

Just a thought to the Magnum Force version. There could be a Spacer or Plate that drops into the gapped area between the inner fender and the upper shock tower to "Sandwich" or take up that gapped area. It would tie all together with the Coil Over shock conversion mount and "Sandwich" everything together. This way you would not need to cut into the inner fender.

I myself would do it like Purple Haze did it but some guys are afraid when it comes to welding and cutting on their cars.

Someone could even offer a Bolt in Kit like the Magnum Force. Using Plates that bolt through the firewall again "Sandwiching" with a plate on the back side. Same thing at the front of the frame rail. Just another thought for the guys that do not have the capability of doing the weld in version or don't want to weld on their cars. So this version would have 3 areas where it is "Sandwiched" and Bolted.

1) The shock tower with a Spacer to take up the gap
2) At the upper cowl area of the firewall
3) At the front frame rail