Carb swap - Electric Choke Wiring

The wire hooked to it right now is hooked to the choke, the other side goes back into the harness (unhooked in this pic). I'll make sure it's giving me 12v running and just go from that. And yeah, the condensor is unhooked (and on the passenger floor right now, just like the entire rest of the front and top of the motor). I'm eventually going to do an HEI swap, I found some Chibby truck coils pretty cheap at the pick a part with nice brackets which I'll mount to the firewall with some rivnuts, but since I'm having to do a carb swap I wanna do it one step at a time instead of quadrupling my frustration, hence the label and the mark in my book "Condensor to coil pos + Wire 3". Also I haven't quite figured out a module mounting/heatsink solution yet. I have a nice zalman flower video cooler which might give it the right fangle, but that is in the future.

Thanks for the reply! Still curious if anybody has used a lokar cable with a bouchillon kickdown, it may be worth it to me just to toftt and try it, I'll definitely post some pics if I go this route.