Let's talk 318/349/390 strokers.

1wild&crazyguy said
349 is gonna necessitate modified stock pistons or custom pistons.$$$

I thought about the low low comp 318 pistons with a 360 crank,but.....

Not sure if this is what you're saying - but the Silvolite 1279P cast piston is the correct Compression height - 1.645"

I think Badger still make one as well....

I had a 349 that ran 13.2 with 318 heads a while back - running the 282S Magnum comp cam.

Main issue is the cast slugs are a flat top with no reliefs - so Piston Valve clearance can get tight at zero deck.

Basically the 392 makes way more sense...just don't run an Eagle Cast crank.............:banghead: