Hypothetical 475-500hp 360 build cost.....???

Here is what I have on the engine stand right now, 94 5.7
The cost is a little higher than normal but I used a sfi balancer and flywheel.
Some parts were used, most were new. $4700 I am sure I missed a few minor parts but all of the hard parts are there.
The long block core was $200 including LA oil pan and timing cover from a member here.
Upon teardown the cylinder bores still had the hone marks in them, but the crank needed turned, and the heads were cracked.
Balanced the bottom end because of the weight difference between the KB107 pistons and stock.
New comp roller cam, new eddy heads and comp roller rockers.
Used intake, carb, valve pan covers.
Here is what I have in it so far.
Sorry the copy and paste did not come out that easy to read.

01/29/11 Engine Rick 200
12/12/11 M1 intake Gary 170
12/18/11 intake gasket Summit 13.95
12/18/11 valve cover gaskets mag Summit 17.88
12/18/11 oil pan gasket Summit 14.5
12/18/11 water outlet gasket Summit 1.25
12/18/11 timing cover gasket Summit 9.95
12/18/11 carb studs Summit 3.95
12/18/11 carb base gasket Summit 5.95
12/18/11 fuel pump block off Summit 3.95
01/07/12 header paint Advanced auto 13.12
12/10/12 fuel log T. J. 92
12/11/12 750 holley BBJ Auto 88.98
01/31/12 air cleaner 40
02/02/12 mag heads Engine machine $40.00
02/06/12 Rod Bearings Summit $71.60
02/06/12 Main Bearings Summit $74.95
02/06/12 Oil pump Summit $29.95
02/06/12 Rings Summit $35.95
02/06/12 Rear main seal Summit $30.95
02/06/12 Pistons Summit $221.95
02/06/12 Damper Summit $199.97
02/06/12 head gaskets Summit $32.95
02/06/12 Flywheel Summit 319.99
03/02/12 hot tank block Engine machine 40
03/02/12 mag block Engine machine $40.00
03/02/12 hone block Engine machine $75.00
03/02/12 install cam brgs and soft plug Engine machine $40.00
03/02/12 grind crank .010 / .010 Engine machine $150.00
03/02/12 balance crank Engine machine $250.00
03/02/12 recondition rods Engine machine $100.00
03/02/12 press pistion on rods Engine machine $60.00
03/02/12 cam bearings Engine machine $19.95
03/02/12 soft plugs Engine machine $21.95
03/01/12 Head bolts Summit $74.56
03/01/12 eddy heads Summit $1,397.70
03/01/12 wire seperator Summit 5.35
03/01/12 valve cover grommet Summit 1.35
03/01/12 plug wires Summit $30.55
02/27/12 distributor Rob $64.10
03/02/12 engine paint Advanced auto $6.19
03/06/12 engine paint Advanced auto $5.90
03/08/12 plastigauge, brake clean Advanced auto $12.71
03/10/12 oil filter adapter gasket Advanced auto $3.39
03/11/12 permatex rtv Advanced auto $7.49
03/11/12 spark plugs Advanced auto $16.72
03/09/12 fuel pump eccentric Hughes $39.95
03/09/12 camshaft key Hughes $0.95
03/09/12 cam bolt and washer Hughes $15.99
03/14/12 Water pump Advanced auto $34.33
03/13/12 vac secondary quick change Summit $28.90
03/13/12 fuel pump Summit $87.95
03/13/12 Fitting 3/8 to ¼ Summit $5.69
03/13/12 3/8 x 1/8 bushing Summit $3.95
03/13/12 pushrods Summit $55.95
03/13/12 oil drain plug gasket Summit $76.00
03/13/12 vac fitting intake Summit $11.99
03/13/12 rebuild kit 3310 holley Summit $32.95
03/13/12 choke kit holley Summit $26.95
03/13/12 header gasket Summit $32.75
03/13/12 fuel line 6 an 2 ft Summit $28.95
03/13/12 fuel pressure take off Summit $11.88
03/13/12 fuel pressure gauge Summit $14.95
03/16/12 oil, filter Advanced auto $25.42