Found this pic on the net and thought I would share!!

-
hemijoejr

hemijoejr

Well-Known Member
Joined
Dec 24, 2009
Messages
345
Reaction score
53
Location
NJ
This is of mine from Carlisle 2011
 

Attachments

  • 07-09-2011 hemi barracuda mopars at carlisle.jpg
    131.4 KB · Views: 617
5.7 hemi said:
Glamour hog, lol!!!
Click to expand...

I just got a chance to read Swifter's posts, looked at his pics and got jealous!!! He is workin on his car and mine is sittin in the garage while I'm workin on puttin my fathers Cummins ISB back together. I's beautifull here today and I was dreaming while I was supposed to be on the factory website searching for parts for some piece of junk forklift and found this pic. :sunny: I miss my car!!
 
What's up Buddie--Good to see you back!!!! No my car is on the hoist and all apart waiting for the motor builder!!!! We are going with callies stroker crank and Diamond pistons,He going to get the cam custom ground,I got my heads back from Indy cylinder head for the porting,polishing and the install of the bigger valves--They look out of this world!!!!! You could drop a golf ball in those ports!!!!!!-Now it's just a waiting game--The builder has to get his sprint car motors out the door because they are starting up again!!!! Man I look at the issue of mopar muscle with your car in it all the time!!!!!!! You have one sweet ride--Joe!!!! Good to see you back here--Steve
 
Hey--Joe pm Denny on the month or date your car was in Mopar muscle I know he would LOVE to see it,He likes Cup holders too I hear!!!!Steve
 
swifter said:
What's up Buddie--Good to see you back!!!! No my car is on the hoist and all apart waiting for the motor builder!!!! We are going with callies stroker crank and Diamond pistons,He going to get the cam custom ground,I got my heads back from Indy cylinder head for the porting,polishing and the install of the bigger valves--They look out of this world!!!!! You could drop a golf ball in those ports!!!!!!-Now it's just a waiting game--The builder has to get his sprint car motors out the door because they are starting up again!!!! Man I look at the issue of mopar muscle with your car in it all the time!!!!!!! You have one sweet ride--Joe!!!! Good to see you back here--Steve
Click to expand...

Thanks again Steve!!! Sounds like you got a runner there! Can't wait to see it done!!
 
1994rm250 said:
joe got some cummins power going on =)
Click to expand...

Just a little.
Colt stage 2 cam
Blue chip x pump
65hp bullydog
30hp b&d injectors
4" full system
Cold air intake
The whole setup was destroyed with neoprene from the inside of a Fram filter. Plugged the piston cooling nozzles and smoked 2 pistons and runed the cylinder bore. At least it was repairable.
Aftermarket intake elbow
Not to mention the trans I just built while the engine was out. PATC stage 3.5 47RE
 
Hey Swifter, who's building your stroker?? are they here in WI?? sounds like it is gonna be a LSX killer and a Coyote killer to boot.
 
Yep--It's revolution motors in Campbellsport Wi, Small guy who builds 1300 hp motors for the mercury racing boats,The boat motors are dual turbos and run on pump gas,You should see the pic's of the turbo set-up's.He has quite a shop and all the machines,I would recommend him to anyone in WIS. The only thing I screwed up was I should have pulled my motor out in Fall,I would be driving right now!!!!! I can't blame him he's busy till the sprint car motors are finished and out the door--he built my Buddie one hell of a 592 stroker motor out of a 440 MAN that thing is just stupid fast and the torque is simply un-real--Steve
 
You must log in or register to reply here.
-

Back
Top